Available online 6 November 2023, 603

Full Lenght Article
Troubleshooting Methodscrane Trolley

Under a Creative Commons license
Open Access


In the article, the analysis of the working processes of the cargo carts showed that as a result of the operation of the cranes, due to a sharp change in the height of the cross-section of the beam in all directions, tensile furnaces appear. A constructive solution to this problem is proposed. The problem was solved by developing wheel blocks and installing them on the crane's metal structures. At the same time, the development of holes in the wheel blocks in different directions allows it to be placed in different versions in the metal structure of the crane.


Crane trolley
wheel block
tension point


Conflict of Interest Statement

The author (s) declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

Bibliographic Information

Verify authenticity via CrossMark

Cite this article as:

Khankelov, T. K., Komilov, S. I., & Nishonov, A. A. (2021). Troubleshooting Methodscrane Trolley. "ONLINE - CONFERENCES&Quot; PLATFORM, 145–147. Retrieved from http://papers.online-conferences.com/index.php/titfl/article/view/603
  • Submitted
    24 November 2021
  • Revised
    24 November 2021
  • Published
    24 November 2021